Light Theremin

This circuit is live in Circuit Canvas. Open it to explore every part and wire, or make your own copy to change values, swap parts and build your own version. Free, right in your browser.

Play music by waving your hand! Move your hand over the light sensor and the pitch changes: more light gives a higher tone, less light gives a lower one. Cover it completely and it slows down to a clicking sound.

Built with parts from the Starter Kit.

Light Theremin Schematic

One of the six inverters in the CD40106 chip, together with the capacitor (C1), the light sensor (R1) and R5, makes an oscillator: a circuit that switches on and off by itself, hundreds of times per second. The light sensor sets how fast. R5 keeps the tone from getting too high and squeaky in bright light. The chip's output drives the buzzer directly.

Try a 10 nF capacitor instead of 100 nF for a higher, squeakier sound.

Light Theremin Parts List

BAT1
9V
BZ1
Buzzer
C1
100 nF
R1
Photoresistor
R5
10 kΩ
U1
CD40106

How to Build the Light Theremin

You can build this circuit on a breadboard. Start by placing the CD40106 chip in the middle, across the gap, and build from there.

Make it your own

Every circuit here is a live project in Circuit Canvas, not just a picture. Copy this one and change a value, swap a part or move it to a stripboard: the schematic and the breadboard layout are linked, so a part added to one appears in the other.

Or start from a blank canvas and draw your own circuit, with thousands of ready-made parts.