Blinking an LED
This circuit is live in Circuit Canvas. Open it to explore every part and wire, or make your own copy to change values, swap parts and build your own version. Free, right in your browser.
This is a simple LED blinker circuit. Once connected, the LED will flash on and off.
Blinking an LED Schematic
R1 and C1 controls the speed of the blinking. The bigger the values, the slower the blink.
There's no exact formula for this circuit. But there's a good starting point. One blink takes roughly:
R × C seconds
Use that as a starting point, the tune from there to get the speed you want.
Blinking an LED Parts List
How to Build the Blinking an LED
Here's how you can build this on a breadboard.
Make it your own
Every circuit here is a live project in Circuit Canvas, not just a picture. Copy this one and change a value, swap a part or move it to a stripboard: the schematic and the breadboard layout are linked, so a part added to one appears in the other.
Or start from a blank canvas and draw your own circuit, with thousands of ready-made parts.